30 lb. Portable Sign Stand with 5' PVC or 6' U-Channel Post

30 LBS. OCTAGON BASE

TrafficSign.com’s 30 lb. Rubber Portable Sign Stand is a great choice for those that need something more versatile than a permanent sign post. At 30 lbs., this sign stand is heavy enough to stay in place, but light enough to easily transport around a facility, parking lot, or side walk.

Base Configuration / Installation & Mounting Hardware

• Made from 95% recycled rubber tires and 5% polyurethane binder.
• Mount Signs with 2 (3/8" dia) holes, 1 top and 1 bottom.
• White PVC Post: 1-7/8" dia (supplied with white cap)

Octagon Rubber Base + U-Channel Assembly

OCTAGON BASE 30 and 60 Lbs. Assembly Instructions

Kit Includes

Octagon Rubber Base

6ft Green Enamel-Coated U-Channel Post 1.12 lbs./ft.

U-Channel Adapter

Set of sign mounting hardware

Set of post + adapter mounting hardware

Step 1

Turn base upside down.

Step 2

Proceed by inserting U-Channel adapter through the bottom of the base opening

Step 3

Hammer down adapter until it is flush with the bottom of the base.

Step 4

Turn base over and attach U-channel post to adapter using mounting hardware supplied with adapter

• 

Octagon Rubber Base + PVC Post Assembly

OCTAGON BASE 30 and 60 Lbs. Assembly Instructions

Kit Includes

Octagon Rubber Base

5ft. White PVC Post

Sign mounting brackets (with hardware included)

• 

Step 1

Insert PVC post into base opening. Make sure post goes as far in as possible, preferably flush with the bottom of the base.

Step 2

Mount brackets to back of sign (Make sure threaded part of bolt is facing outwards, as seen on the illustration below)

• 

Step 3

Widen the opening of the bracket and make sure it wraps around the post.

• 
• 

Step 4

Tighten with screws supplied.

• 
• 
•